perfect for exterior barbecues things like that. then we're going to get into what else? suzy: spraying the garage doors. i'll get set up for that. you get to work on this. phillips: okay. off to the shop. okay, let's build a one-hour table together that will last forever. now, this material right here is 3/4-inch-thick stock, and it's a type of board that's used in the marine industry. it doesn't rot. it stays flat. and it's perfect for food use because it stays nice and clean. okay, so, now, look at this. corner to corner just drew lines with a permanent marker with a straightedge. and right in the middle of that, i'm going to put a screw -- sink it in about, oh half an inch, just like that. nice, big washer head right there. and over here at the band saw -- primarily a band-saw project with pocket jig. you can see i have a pivot set up. now, that pivot right there is curved for the screw to go in, and it's very important that the center of that pivot is right behind the gullet -- okay, now, that's the valley between the teeth -- to get a perfect cut. now, this is locke